LINYI FANGHUA STEEL TRADDING CO ., LTD
If you’re in the business of shipping and handling heavy goods, then you’re no stranger to steel strapping. Steel strapping is a popular and reliable way to secure goods for transportation, but it can be a challenge to cut. In this article, we’ll share some tips and techniques for cutting steel strapping safely and efficiently.
Tip 1: Use the Right Tools
The first step to cutting steel strapping is to use the right packing tools. You’ll need a good pair of steel strapping cutters, also known as bolt cutters, that are designed to cut through steel. Look for cutters that have a hardened steel blade and a comfortable grip. The size of the cutters you need will depend on the width of your steel strapping, but a 24-inch cutter is a good all-around size.
Tip 2: Position the Steel Strapping Correctly
Once you have your cutters, the next step is to position the steel strapping correctly. Lay the steel strapping flat on a sturdy surface and ensure it’s straight and taut. If the strapping is twisted or loose, it can be difficult to cut cleanly.
Tip 3: Mark the Cut Line
Before you cut, it’s a good idea to mark the cut line on the steel strapping. Use a marker or a piece of chalk to make a clear line where you want to cut. This will help ensure a clean cut and prevent you from cutting too much or too little of the strapping.
Tip 4: Position the Cutters Correctly
When you’re ready to cut, position the cutters correctly. Place the blade of the cutters perpendicular to the steel strapping, with the handle facing up. The blade should be positioned on the cut line you marked earlier. Ensure the cutters are in the correct position before applying pressure to the handles.
Tip 5: Apply Even Pressure
To cut through the steel strapping, apply even pressure to the cutters’ handles. Don’t try to force the cutters through the strapping, as this can damage the blades and make cutting more difficult. Instead, apply steady pressure until the blades cut through the strapping.
Tip 6: Cut the Steel Strapping in Stages
If you’re cutting through thick steel strapping, it may be necessary to cut it in stages. Start by making a shallow cut through the strapping, then repeat the process, cutting a little deeper each time. This will help prevent the blades from becoming damaged and ensure a clean cut.
Tip 7: Wear Protective Gear
Finally, it’s important to wear protective gear when cutting steel strapping. Wear gloves and safety glasses to protect your hands and eyes from flying debris. Steel strapping can be sharp, so take care to avoid cuts or injuries.
Cutting steel strapping can be a challenge, but with the right tools and techniques, it can be done safely and efficiently. Follow these tips to ensure a clean cut every time, and remember to wear protective gear to stay safe. Whether you’re in the shipping and handling business or simply need to cut steel strapping for a DIY project, these tips will help you get the job done.